The KET-MAC-100 measures up to 3 alternating current using Rogowski sensors, which are lightweight and flexible, suitable for monitoring of important electric loads.
The analog to digital conversion module uses a DSP (Digital Signal Processing) to reduce noise and increase accuracy.
The high sensitivity of the radio module allows to reach distances of over 150 m in free air.
The LinkQuality feature indicates the actual quality of radio reception to allow rapid positioning of the device.
The battery life is greater than two years with ordinary alkaline batteries.
Protection Range | IP54 |
Operative Temperature | -15 ÷ +60 °C |
Dimensions | 145 x 85 x 38 mm (W x H x D) |
Mounting | Wall mounting with supplied supports |
Material | ABS, self extinguishing: UL 94 V-O |
Supply Voltage | 1.5 V or 1.2 V rechargeable |
Battery Type | 2 AA type |
Approximate Battery Life | > 2 years |
Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
Radio Frequency | 2.4 GHz ISM Band |
Output Power | -10 ÷ +3 dBm |
Sensitivity | -101 dBm |
Antenna Type | Internal |
Max Distance (Free Air) | Over 150 m |
Radio Signal Indicator | Integrated (LinkQuality) |
Output Power Adjustment | From local keyboard and remotely |
Firmware Upgrade | Via radio |
Sensor Type | External Rogowski with coaxial cable |
Current Range | 0 ÷ 1500 A (50-60 Hz) |
Internal Resistance | 30 O |
Precision | ±1% |
Linearity | ±2% |
Influence of External Magnetic Field | ±5% |
Maximum Working Voltage | 1000 V |
Hi Pot Test | 400 VAC 50-60 Hz for 1 min |
Insulation Class | IEC1010-1 Cat. III |