The KET-DMX-416 manages up to 16 freely configurable digital inputs. Each channel can be set as an alarm input, pulse counter or hour counter.
Through an RS485 interface and the high sensitivity of the radio module, which allows to reach distances of more than 900 m in free air, it is integrated with the other devices of the X-Monitor network.
Internal FRAM for continuous saving of counters, so as not to lose data in case of sudden power failure.
All in compact dimensions with electrical panel mounting on DIN standard rails.
Low voltage power supply, also suitable for telephone centres.
Protection Range | Front: IP40; Screw Terminals: IP20 |
Operative Temperature | -20 ÷ +60 °C |
Dimensions | 53.5 x 91 x 61 mm (W x H x D) |
Mounting | DIN rail or Wall mounting with supplied supports |
Required DIN modules | 3 DIN modules |
Electric Board Type | Industrial or switchboard |
Material | Blend PC/ABS sel extinguishing UL94-VO |
Supply Voltage | 12 ÷ 24 VDC, 12 ÷ 20 VAC; 230 VAC with integrated power supply |
Consumption | < 1.5 W @ 12 ÷ 20 VAC / < 1.5 W @ 12 ÷ 24 VDC / < 1.5 W @ 230 VAC |
Connectors types | Screw terminal |
Memory Type | Flash: 256KB; E²PROM: 4KB; RAM: 16KB |
Data Storage Capacity | Internal F-RAM to ensure data storage even in case of power failure |
Supported Protocols | ModBUS RTU |
Connectors types | Screw terminal |
Channels | 16 digital inputs, connection via terminal block |
Digital Inputs | For clean contact with alarm functions count pulses and count hours |
Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
Radio Frequency | 2.4 GHz ISM Band |
Output Power | +3 ÷ +20 dBm |
Sensitivity | -104 dBm |
Antenna Type | RPSMA connector, 90° antenna supplied |
Max Distance (Free Air) | Over 1000 m |
Radio Signal Indicator | Integrated (LinkQuality) |
Output Power Adjustment | From local keyboard and remotely |
Firmware Upgrade | Via radio |