Load Item...


Central heating module for MaggiorDOMO® systems

XCM-MCT-100 allows the connection of a MaggiorDOMO® system to the heating plant in order to optimize the use of energy and achieve greater savings. The module provides a maximum of seven clean contacts that can be combined with the pumps of the same number of control unit circuits. As soon as an apartment connected to a circuit requires heat, the relative contact closes allowing the activation of the relative circuit pump combined with it. The module also provides a value proportional to the heat demand of the periphery (via 0-10V and 4-20mA signals), allowing the control unit that governs the central unit to deliver energy in proportion to the actual demand.

The flow temperature acquisition function allows to interrupt the metering if the flow falls below a threshold. The threshold can also be set remotely.

XCM-MTC-100 provides a contact that can be connected to the calendar of the MaggiorDOMO® system so as to manage the times of the central unit remotely, or acquires a contact provided by the central clock that informs the system of the operation of the central unit, so as to ensure the correct metering of the heat in the periphery.

 

GENERAL SPECIFICATIONS
Protection Range Front: IP40; Screw Terminals: IP20
Operative Temperature -10 ÷ +60 °C
Relative Humidity MAX 95% not condensing
CASE
Dimensions 73 x 136 x 60 mm (W x H x D)
Mounting DIN-rail
Required DIN modules 4 DIN modules
Electric Board Type Industrial or switchboard
Material Self extinguishing: UL 94 V-O
POWER SUPPLY
Supply Voltage 24 VAC (50-60 Hz), 35 VA max or 20 ÷ 30 VDC
Consumption < 12 W
Connectors types Removable terminals
UPS
Battery Type SuperCap for internal clock function maintenance
Approximate Battery Life Keep watch data in the event of power failure for 3 days when the battery is fully charged
DATALOGGER FUNCTION
Memory Type Flash 256 KB; RAM 4 KB
RS485 INTERFACE
Supported Protocols Master or slave ModBUS RTU
Communication Rate 100 Kbit/s
Isolation Non optoisolated
Connectors types Removable terminals
DIGITAL INPUTS
Channels 2 for clean contact (Central On/Off, Central Alarm)
ANALOG INPUTS
Channels 1 for flow temperature
Precision PT1000
DIGITAL OUTPUTS
Channels 9 for clean contact (7 pumps, 1 boiler, 1 calendar)
ANALOG OUTPUTS
Output Type 1 of type 0-10 V and 1 of type 4-20 mA (proportional output)
CERTIFICATIONS
Approvals CE
© 2019 Kerberos. All Rights Reserved. | MaggiorDOMO is a registered trademark of Kerberos S.r.l. Unipersonale - VAT IT-03929170284 - R.E.A. 348334 - C.C.I.A.A. 03929170284 - Share Capital € 100.000,00 - Privacy Policy- Cookie Policy- Cookie Settings