KET-MDC-200 allows the measurement of continuous current up to a maximum of -2500/+2500 A, using a small Hall sensor connected with a comfortable cable length of 2m.
Sensor adjustment should be performed locally through the integrated display.
Current, link quality, battery and connection status are displayed locally and in real time.
The high sensitivity of the radio module allows to reach distances of over 150 m in free air.
The LinkQuality feature indicates the actual quality of radio reception to allow rapid positioning of the device.
Protection Range | IP54 |
Operative Temperature | -15 ÷ +60 °C |
Dimensions | 145 x 85 x 38 mm (W x H x D) |
Mounting | Wall mounted with supplied plate |
Material | ABS, self extinguishing: UL 94 V-O |
Supply Voltage | 1.5 V or 1.2 V rechargeable |
Battery Type | 2 AA type |
Approximate Battery Life | > 2 years |
Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
Radio Frequency | 2.4 GHz ISM Band |
Output Power | -10 ÷ +3 dBm |
Sensitivity | -101 dBm |
Antenna Type | Internal |
Max Distance (Free Air) | Over 150 m |
Radio Signal Indicator | Integrated (LinkQuality) |
Output Power Adjustment | From local keyboard and remotely |
Firmware Upgrade | Via radio |
Sensor Type | Hall effect probe |
Current Range | -2500 ÷ +2500 A |
Typical Sensitivity | 280 V/T |
Linearity | ±0.2% |
Linearity Range | -7.5 +7.5 mT |
Nonlinearity | ±5% |
Temperature Drift | < ±200 ppm/°C |
Noise Spectral Density | <125 nT/sqrt(Hz) (f = 10 Hz ÷ 10 Hz) |