Ultrasonic clamp-on thermal energy measurement kit for fixed installation
KET-KCO-100 is a kit for thermal energy measurements complete with clamp-on ultrasonic flow meter for fixed installation, KET-CCC-100 computer and temperature probe.
Range of sensors for the measurement of flow rate in a wide variety of fluids, including liquids and ultra-pure and non conductive, for pipes from DN10 to DN3000 and for temperatures up to 200 °C.
Measuring principle based on the transit time with dual DSP technology for greater accuracy.
Sensors non-intrusive, no moving parts, can offer a quick response time. Ability to integrate temperature sensors Pt100 clamp-on for the measurement of energy.
Installation of sensors driven by software, for easy identification of the correct relative positions.
Display showing flow and volume, analog output 4-20 mA, relay outputs and software programming. Suitable for fluid speed from 0.01 to 25 m/sec.
Precision 1-3% of the measured value depending on the application, 0.5% with field calibration.
| Protection Range | IP66 |
| Operative Temperature | -10 ÷ +60 °C |
| Dimensions | 160 x 120 x 81 mm (W x H x D) |
| Mounting | Wall |
| Material | Aluminium |
| Supply Voltage | 100 ÷ 240 VAC / 9 ÷ 36 VDC |
| Consumption | < 5 W |
| Supported Protocols | ModBUS RTU |
| Output Type | A 4-20 mA |
| Principle of Operation | Ultrasonic based on transit time |
| Speed Range | 0.01 ÷ 25 m/s |
| Resolution | 0.25 mm/s |
| Repeatability | 0.15% of the measured value |
| Precision | ±1-3% range of the measured value, ±0.5% with master meter and ±0.5% speed of the measured value |
| Measuring Frequency | 100 Hz |
| Response Time | 1 second |
| Tube Diameter | DN 10 ÷ 3000 |
Accounting
Calorie/refrigeration consumption monitoring with Clamp-on meter
Monitoring and efficiency of refrigeration units
Monitoring of Thermal Energy Consumption
