Kerberos - Wireless 6 digital inputs with repeater interface

Wireless 6 digital inputs with repeater interface

The KET-DMX-666 is equipped with 6 digital inputs with signal repeater freely configurable.

Each channel can be set as an alarm, pulse counter or hour counter.

It is equipped with a high sensitivity radio module that can reach distances of more than 1000 m in free air.

Maximum flexibility of power supply, direct from the mains or low voltage, both DC and AC.

Format suitable for mounting in electrical panel on DIN-rail.

The internal F-RAM memory for the continuous saving of the meters allows to keep the data even in case of sudden power failure.

GENERAL SPECIFICATIONS

Protection Range	Front: IP40; Screw Terminals: IP20
Operative Temperature	-20 ÷ +60 °C

CASE

Dimensions	88 x 110 x 60 mm (W x H x D)
Mounting	Wall mounting or on DIN rail
Required DIN modules	5 DIN modules
Electric Board Type	Industrial or switchboard
Material	Blend PC/ABS sel extinguishing UL94-VO

POWER SUPPLY

Supply Voltage	12 ÷ 24 VDC, 12 ÷ 20 VAC; 230 VAC with integrated power supply
Consumption	< 1.5 W @ 12 ÷ 20 VAC / < 1.5 W @ 12 ÷ 24 VDC / < 1.5 W @ 230 VAC
Connectors types	Screw terminal

DATALOGGER FUNCTION

Memory Type	Flash: 256KB; E²PROM: 4KB; RAM: 16KB
Data Storage Capacity	Internal F-RAM to ensure data storage even in case of power failure

DIGITAL INPUTS

Channels	6 digital inputs + 1 common, connection via terminal block
Digital Inputs	For clean contact with alarm functions count pulses and count hours

DIGITAL OUTPUTS

Channels

6 digital outputs for clean contact repeating the inputs

RADIO MODULE

Supported Protocols	X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0
Radio Frequency	2.4 GHz ISM Band
Output Power	+3 ÷ +20 dBm
Sensitivity	-104 dBm
Antenna Type	RPSMA connector, 90° antenna supplied
Max Distance (Free Air)	Over 1000 m

FUNCTIONALITY

Radio Signal Indicator	Integrated (LinkQuality)
Output Power Adjustment	From local keyboard and remotely
Firmware Upgrade	Via radio