The KET-DMX-610 is equipped with 6 digital inputs with signal repetition freely configurable.
Each channel can be set as an alarm input, pulse counter or hour counter.
It is equipped with an RS485 interface with ModBUS RTU protocol and a high sensitivity radio module that can reach distances of over 900 m in free air.
Maximum flexibility of power supply, direct from the mains or low voltage, both DC and AC.
Format suitable for mounting in electrical panel on DIN standard rail.
The internal F-RAM memory for the continuous saving of the meters allows to keep the data even in case of sudden power failure.
Protection Range | Front: IP40; Screw Terminals: IP20 |
Operative Temperature | -20 ÷ +60 °C |
Dimensions | 88 x 110 x 60 mm (W x H x D) |
Mounting | Wall mounting or on DIN rail |
Required DIN modules | 5 DIN modules |
Electric Board Type | Industrial or switchboard |
Material | Blend PC/ABS sel extinguishing UL94-VO |
Supply Voltage | 12 ÷ 24 VDC, 12 ÷ 20 VAC; 230 VAC with integrated power supply |
Consumption | < 1.5 W @ 12 ÷ 20 VAC / < 1.5 W @ 12 ÷ 24 VDC / < 1.5 W @ 230 VAC |
Connectors types | Screw terminal |
Memory Type | Flash: 256KB; E²PROM: 4KB; RAM: 16KB |
Data Storage Capacity | Internal F-RAM to ensure data storage even in case of power failure |
Supported Protocols | ModBUS RTU |
Connectors types | Screw terminal |
Channels | 6 digital inputs + 1 common, connection via terminal block |
Digital Inputs | For clean contact with alarm functions count pulses and count hours |
Channels | 6 digital outputs for clean contact repeating the inputs |