Load Item...

ModBUS 6 digital inputs with repeater interface

The KET-DMX-610 is equipped with 6 digital inputs with signal repetition freely configurable.

Each channel can be set as an alarm input, pulse counter or hour counter.

It is equipped with an RS485 interface with ModBUS RTU protocol and a high sensitivity radio module that can reach distances of over 900 m in free air.

Maximum flexibility of power supply, direct from the mains or low voltage, both DC and AC.

Format suitable for mounting in electrical panel on DIN standard rail.

The internal F-RAM memory for the continuous saving of the meters allows to keep the data even in case of sudden power failure.

Protection Range Front: IP40; Screw Terminals: IP20
Operative Temperature -20 ÷ +60 °C
Dimensions 88 x 110 x 60 mm (W x H x D)
Mounting Wall mounting or on DIN rail
Required DIN modules 5 DIN modules
Electric Board Type Industrial or switchboard
Material Blend PC/ABS sel extinguishing UL94-VO
Supply Voltage 12 ÷ 24 VDC, 12 ÷ 20 VAC; 230 VAC with integrated power supply
Consumption < 1.5 W @ 12 ÷ 20 VAC / < 1.5 W @ 12 ÷ 24 VDC / < 1.5 W @ 230 VAC
Connectors types Screw terminal
Memory Type Flash: 256KB; E²PROM: 4KB; RAM: 16KB
Data Storage Capacity Internal F-RAM to ensure data storage even in case of power failure
Supported Protocols ModBUS RTU
Connectors types Screw terminal
Channels 6 digital inputs + 1 common, connection via terminal block
Digital Inputs For clean contact with alarm functions count pulses and count hours
Channels 6 digital outputs for clean contact repeating the inputs
© 2019 Kerberos. All Rights Reserved. | MaggioDOMO is a registered trademark of Kerberos S.r.l. - VAT IT-03929170284 - R.E.A. 348334 - C.C.I.A.A. 03929170284 - Share Capital € 100.000,00 - Privacy Policy - Cookie Policy