The KET-DMX-200 is an interface with six digital inputs freely configurable.
Each channel can be set as an alarm input, pulse counter or time counter.
The standard antenna connector supports 90° joint antennas or cabled ones for placement outside the electrical panel.
Maximum power supply flexibility: KET-DMX-200 can be plugged on the power supply network or low voltage, both DC or AC.
New format suitable for mounting on DIN rails in electrical boxes.
New internal FRAM enables continually saved counters to avoid loss of data in case of sudden lack of power.
The amplified range of the radio module allows over 1000 m in free air.
Protection Range | Front: IP40; Screw Terminals: IP20 |
Operative Temperature | -20 ÷ +60 °C |
Dimensions | 88 x 110 x 60 mm (W x H x D) |
Mounting | Wall mounting or on DIN rail |
Required DIN modules | 5 DIN modules |
Electric Board Type | Industrial or switchboard |
Material | Blend PC/ABS sel extinguishing UL94-VO |
Supply Voltage | 12 ÷ 24 VDC, 12 ÷ 20 VAC; 230 VAC with integrated power supply |
Consumption | < 1.5 W @ 12 ÷ 20 VAC / < 1.5 W @ 12 ÷ 24 VDC / < 1.5 W @ 230 VAC |
Connectors types | Screw terminal |
Memory Type | Flash: 256KB; E²PROM: 4KB; RAM: 16KB |
Data Storage Capacity | Internal F-RAM to ensure data storage even in case of power failure |
Channels | 6 digital inputs + 1 common, connection via terminal block |
Digital Inputs | For clean contact with alarm functions count pulses and count hours |
Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
Radio Frequency | 2.4 GHz ISM Band |
Output Power | +3 ÷ +20 dBm |
Sensitivity | -104 dBm |
Antenna Type | RPSMA connector, 90° antenna supplied |
Max Distance (Free Air) | Over 1000 m |
Radio Signal Indicator | Integrated (LinkQuality) |
Output Power Adjustment | From local keyboard and remotely |
Firmware Upgrade | Via radio |