Load Item...


Three phase network analyzer with display

KET-PMT-300 is a three phase network analyzer with a built in backlighted display to show measured values. Direct access to setup is provided through local menu.

The analyzer can be used for current reading using Rogowski transducers and is suitable for voltage range up to 600 Vac (50 Hz or 60 Hz).

The following electrical values are provided: Vrms, Irms, Watts (bi-directional), Var, VA, frequency, Cosφ, bidirectional energy.

All values can be acquired via serial communication both in floating-point format that normalized.

KET-PMT-300 is equipped with CANopen, RS485 and UART-TTL communication ports.

GENERAL SPECIFICATIONS
Power Supply 10 ÷ 40 V DC, 19..28 V AC (50-60 Hz)
Consumption Max 2.5 W
HMI
Insulation 3750 V AC between measure inputs and other circuits 1500 V AC between power supply inputs and communication ports 1500 V AC between power suply inputs and retransmitted output
Protection Range IP20
ESD Protection 4 kV
Insertion Types Single phase, Aron (three phase and 2 tranducers), Four wires (three phase and 3 tranducers)
External Tranducers Rogowski Commercial CT with 5A secondary max, typical accuracy 0.5%tranducers, max 100 mV RMS output
Operating Condition -10 ÷ +65 °C 30 ÷ 90% not condensing
Precision 0,2% (excluding the transducer error)
Display 2 rows x 16 chars display
Connections Screw clamp connectors 5.08 mm
Enclosure Plastic material UL V0
Dimensions 105 x 89 x 60 mm (W x H x D) (6 moduli DIN)
Configuration Through Keyboard
© 2019 Kerberos. All Rights Reserved. | MaggioDOMO is a registered trademark of Kerberos S.r.l. - VAT IT-03929170284 - R.E.A. 348334 - C.C.I.A.A. 03929170284 - Share Capital € 100.000,00 - Privacy Policy - Cookie Policy