Load Item...


Three phase network analyzer with Display

The energy meter KET-PMT-210 is powered and suitable for energy measurement in industrial and civil environment, with integrated RS485 ModBUS communication.

It can be mounted on panel or DIN rail with the convenient mounting system and the removable display .

In addition to energy, the device measures the main electrical parameters and makes them available on the communication integrated port.

KET-PMT-210 is built in accordance with EN 50470-3. The accuracy of the active energy is referred to IEC / EN 62053-21 class 1 while that of the reactive energy is related to IEC / EN 62053-23 Class 2.

On the front panel is the LED metrology.

KET-PMT-210 can be connected to the Master ModBUS wireless KET-RMB-211 or directly to the Gateway X-Monitor.

GENERAL SPECIFICATIONS
Protection Range Front: IP40; Screw Terminals: IP20
Operative Temperature -25 ÷ +55 °C
Storage Temperature -30 ÷ +70 °C
Relative Humidity MAX 90% non condensing
CASE
Dimensions 72 x 72 x 65 mm (W x H x D)
Mounting Panel or on DIN-rail
Required DIN modules 4 DIN modules
Electric Board Type Industrial or switchboard
Material Noryl, PA66, self extinguishing: UL 94 V-O
POWER SUPPLY
Supply Voltage Self power: 40 ÷ 480 VAC (45-65 Hz)
Consumption Self-consumption <= 2 VA/1 W
Connectors types Integrated screw terminals
POWER METER
Insertion Types Four wires (three phase and 3 Current Transformer)
Connection Commercial Current Transformer with secondary max 5 A, typical precision 5%
Maximum Rated Current In: primary current corrisponding to 5 A secondary output. Imax: 1.2 In (6 A secondary)
Accuracy ±0.5 RDG
Connections 2 Screws 2.4 mm x 3.5 mm; tightening torque: 0.4 Nm / 0.8 Nm
ESD Protection 4 kV
Configuration By keyboard
RS485 INTERFACE
Supported Protocols ModBUS RTU
Communication Rate Max 115 Kbps
Isolation 4000 VRMS
Connectors types Integrated screw terminals
CURRENT AND VOLTAGE INPUT
Ingressi Tensione 3 x 230 VLN
Current Inputs 6 A @ 50 Hz
CERTIFICATIONS
Approvals CE, cULus listed
Security IEC60664, IEC61010-1, EN60664, EN61010-1, EN62052-11
Metrology EN62053-21, EN62053-23, EN50470-3

Related Product

© 2019 Kerberos. All Rights Reserved. | MaggioDOMO is a registered trademark of Kerberos S.r.l. - VAT IT-03929170284 - R.E.A. 348334 - C.C.I.A.A. 03929170284 - Share Capital € 100.000,00 - Privacy Policy - Cookie Policy