The KET-PSC-400 has four buttons that can be used as a control element in industrial environments.
Using with the controllers of the X-Monitor it can execute simple or complex commands (timed pressure, double-click, etc.) for the activation of different features.
The indicator LEDs incorporated can be controlled remotely indicating the success of the operation.
The C-cell batteries provide a high level of autonomy while the degree of protection makes it suitable for even the harshest environments.
The command KET-PSC-400 uses the network X-Monitor already.
It comes with membranes of different type to adapt to the most varied requirements.
Protection Range | IP65 |
Operative Temperature | -10 ÷ +70 °C |
Storage Temperature | -20 ÷ +85 °C |
Relative Humidity | MAX 80% not condensing |
Dimensions | 80 x 81 x 56 mm (W x H x D) |
Mounting | Wall mounting |
Material | PC/ABS, Self extinguishing: UL 94 V-O |
Supply Voltage | 2 x 1.5 V |
Battery Type | 2 type C, half torch |
Approximate Battery Life | > 3 years |
Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
Radio Frequency | 2.4 GHz ISM Band |
Output Power | +3 ÷ +20 dBm |
Sensitivity | -101 dBm |
Antenna Type | 1 internal |
Max Distance (Free Air) | Over 600 m |
Radio Signal Indicator | Integrated (LinkQuality) |
Output Power Adjustment | From remotely |
Firmware Upgrade | Via radio |
Services | Function management via wireless commands. Maintaining the state of association to the network after a power failure. |