The XCM-TMW-110 zone thermostat, for MaggiorDOMO® Stand Alone system, detects the room temperature and allows the setting of the set during the comfort zones programmed on the chronothermostat. The thermostat can be placed where the actuators of the XCM-ATW series are installed on heating bodies with access to the actuator itself difficult (e.g. heater covers, convectors, fan coils, radiant panels or floor, manifolds). Equipped with LCD display for viewing the measured room temperature, active set, external temperature and battery charge status. Works with three alkaline stylus batteries (AA), included.
Protection Range | IP30 |
Operative Temperature | -15 ÷ +60 °C |
Dimensions | 76 x 79 x 33 mm (W x H x D) |
Mounting | Wall mounting |
Material | ABS, self extinguishing: UL 94 V-O |
Supply Voltage | 3 x 1.5 V |
Battery Type | 3 AA |
Approximate Battery Life | > 3 years |
Supported Protocols | IEEE 802.15.4 ZigBee Pro® |
Radio Frequency | 868 MHz |
Output Power | +3 dBm |
Sensitivity | -104 dBm |
Antenna Type | 1 internal |
Max Distance (Free Air) | Up to 150 m |
Radio Signal Indicator | Integrated (LinkQuality) |
Output Power Adjustment | From local menu and remotely |
Firmware Upgrade | Via radio |
Services | Programming of the room temperature. LCD display for viewing the measured and configured temperature and battery charge status |
Measure Range | -10 ÷ +50 °C |
Precision | ± 0.5 °C |