External lighting management with presence detection
This scheme shows the Kerberos solution for the management of external lighting through wireless control devices, motion sensors, PLC and gateway with BMS functions.
Implementation and control systems integrated with monitoring.
X-Monitor technology allows the same network to be used for monitoring and implementation. A wide range of wireless devices allows the control of any type of device while the use of standard protocols facilitates the integration in retrofit interventions and in the presence of local logic.
X-Monitor Ready, our premium turnkey service.
A variety of services designed for our customers, with clear and defined prices to ensure the result, have a single interlocutor, finding an industrial-class solution to the typical problems of monitoring such as security, data transport, remote access, maintenance.
We also take care of the inspection, design, safety practices, the supply of pre-clamped and certified electrical panels, installation, configuration and testing.
Implementation and control systems integrated with monitoring.
X-Monitor technology allows the same network to be used for monitoring and implementation. A wide range of wireless devices allows the control of any type of device while the use of standard protocols facilitates the integration in retrofit interventions and in the presence of local logic.
X-Monitor Ready, our premium turnkey service.
A variety of services designed for our customers, with clear and defined prices to ensure the result, have a single interlocutor, finding an industrial-class solution to the typical problems of monitoring such as security, data transport, remote access, maintenance.
We also take care of the inspection, design, safety practices, the supply of pre-clamped and certified electrical panels, installation, configuration and testing.
Functional diagram (PNG) Legend Indications on reading the diagram
The management of outdoor lighting mainly concerns certain areas to be lit only in case of presence, such as public or private roads, service stations, public or company parking lots and areas for loading/unloading warehouses. Intelligent management of outdoor lighting not only leads to economic savings due to reduced electricity consumption, but also limits light pollution in our cities.
This scheme describes Kerberos's proposal for external lighting management using wireless control devices,
KET-DIM-100, and motion sensors, KET-PIR-112, which allow the luminous flux of one or more lights to be switched off and regulated in the presence of people and/or vehicles.
The use of the KET-GZE-360, a gateway with BMS functions, serves to support the management of complex scenarios, while the ModBUS KET-PLC-200 logic controller allows the management of contactors.
KET-GZE-360
It is an advanced gateway with BMS functions for the management of building automation scenarios. It incorporates a ModBUS TCP/IP server that allows the connection of the X-Monitor network to SCADA systems, programmable logic (PLC) and human-machine interfaces (HMI systems and displays). Master ModBUS function for up to 32 slave profiles and datalogger with data recording capacity for periods longer than 3 months. It is also equipped with Ethernet interface, 3G/4G/NB-IoT/LTE-M modem, Wi-Fi and radio module.
Kerberos offers as additional services the preconfiguration and pre-insertion in the electrical panel (Panel 1) of the devices for an easy and fast installation, the development of dedicated logics according to the needs of the customer, SIM for data traffic at an annual fee at very advantageous prices and the X-Platform Easy platform for data acquisition and visualization, configurable to your needs.
KET-RMB-211
Its RS485 interface allows it to act both as a ModBUS Slave for receiving commands from the KET-GZE-360 for managing scenarios and as a ModBUS Master for managing the KET-PLC-200 for controlling contactors. Thanks to the radio module with X-Monitor Protocol (X-MP) it repeats the command signal to the KET-DIM-100. It can be supplied pre-configured and inserted in the electrical panel (Panel 1).
KET-PLC-200
It is a logic controller, thanks to the considerable number of inputs and outputs, allows you to create a flexible, modular and expandable network of control devices. It uses 4 ModBUS Slave profiles and therefore a maximum of 8 profiles can be connected for each ModBUS Master. It can be supplied pre-configured and inserted in the electrical panel. (Panel 1).
KET-DIM-100
It is an analog wireless control module that allows the remote control of luminaires equipped with a 0-10 V control input. It can be supplied pre-configured.
KET-PIR-112
It is a motion sensor that allows you to operate through the KET-DIM-100 one or more lights in case of presence of people and / or vehicles. It can be supplied pre-configured.
KET-RMB-210.S (optional)
It is a wireless repeater with extended radio range with X-Monitor Protocol (X-MP) that can reach distances of over 1000 m in free air. It is pre-inserted in the switchboard with IP65 degree of protection, making it perfect for installation in outdoor areas with structural obstacles that limit the radio signal of other wireless devices (see "Tips on how to install radio devices"). It can be supplied pre-configured.
