Functional diagram (PNG) Legend Indications on reading the diagram
Often companies do not give due importance to the microclimate of the working environment and do not realize that an inadequate microclimate can not only compromise the safety and health of workers, but can create feelings of discomfort and decrease productivity. For example, during the summer seasons, when excess humidity and heat are not corrected by proper air conditioning.
Temperature and relative humidity are among the factors to qualify the microclimate of a working environment as established by Legislative Decree 81/08 Title VIII and all. IV. The optimal level of humidity for our organism is between 40 and 60% and at a temperature between 19 and 24°.
Another very important aspect for comfort and safety are the levels of internal light in a work environment as established by the UNI EN 12464-1 standard.
This functional scheme describes Kerberos' proposal for monitoring the environmental parameters of temperature, relative humidity and light intensity using high-precision wireless environmental sensors for indoor use, KET-THL-200, and for outdoor use, KET-THL-200.S. The latter is necessary to provide data to be compared with the measurements of the internal sensors and to activate automatic temperature control systems, where required (see Functional Scheme 7). The KET-GZE-310 gateway allows, thanks to the X-MP radio module, the management of the entire wireless sensor network. In case of structural obstacles (see "Advice on how to install radio devices") it will be necessary to install repeater, KET-RMB-210.S/220, to ensure the strength of the network.
It is an advanced gateway with an Ethernet interface, Wi-Fi and 3G/4G/NB-IoT/LTE-M modem for viewing data on external platforms. Equipped with radio module with X-Monitor Protocol (X-MP), which can reach distances of over 1000 m in free air, for the management of environmental sensors KET-THL-200/200.S. Function datalogger with the ability to record data for periods longer than 3 months.
Kerberos offers as additional services the preconfiguration and pre-insertion in the electrical panel (Panel 1) of the devices for easy and fast installation, SIM for annual data traffic at very low prices and the X-Platform Easy platform for data acquisition and visualization, configurable to your needs.
It is a wireless environmental sensor for temperature, relative humidity and light for indoor wall installation. Equipped with X-MP radio module with internal antenna that can reach a distance of more than 600 m in free air. The battery power supply and the wall mounting bracket allow it to be installed anywhere as needed. It can be supplied
It is a wireless ambient temperature, relative humidity and light sensor for outdoor wall installation. Necessary to compare the data collected by the KET-THL-200, thanks to automatic temperature management systems. Equipped with X-MP radio module with internal antenna that can reach a distance of more than 600 m in free air. The battery power supply and the wall mounting bracket allow it to be installed anywhere as required. It can be supplied pre-configured.
KET-RMB-210.S / KET-RMB-220 (optionals)
For medium/long distances or in the presence of structural obstacles (see "Tips on how to install radio devices"), Kerberos has wireless repeater with extended radio range in X-MP that can reach distances of more than 1000 m in free air: the KET-RMB-210.S is pre-inserted in the switchboard with IP65 degree of protection, while the KET-RMB-220 for wall mounting. They can be supplied pre-configured.