Wireless control module for DALI devices
KET-DIM-200 is the DALI-compatible wireless analogue control module that enables the remote control of lighting devices.
The DALI system, based on the IEC 62386 standard, enables the automated management of lighting systems in digital mode. Through a two-way communication process between devices and control units, it is possible to execute on, off or dimming commands, report faults or diagnostic information.
The KET-DIM-200 is designed to be easily integrated with BMS / BEMS systems via the smart gateway. Communication between the gateway and the KET-DIM-200 modules is based on a 2.4 GHz mesh protocol on the IEEE 802.15.4 open standard.
Its small size allows it to be used inside luminaires.
The integrated diagnostic function allows the load to be monitored and any malfunctions to be detected.
The integrated repeater function and amplified radio allow the X-Monitor network to be extended easily and economically.
| Protection Range | IP40 |
| Operative Temperature | -15 ÷ +70 °C |
| Dimensions | 100 x 45 x 30 mm (W x H x D) |
| Mounting | Wall mounting |
| Material | Black nylon |
| Supply Voltage | 230 VAC with integrated power supply (50-60 Hz) |
| Consumption | 1.5 VA |
| Connectors types | Device supplied with pre-skinned cable terminals |
| Channels | 1 |
| Digital Inputs | For clean contact with control, alarm, second counter functions. |
| Output Type | Remote control of lighting devices with DALI standard (up to 10 channels) |
| Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
| Radio Frequency | 2.4 GHz ISM Band |
| Output Power | +3 ÷ +20 dBm |
| Sensitivity | -104 dBm |
| Antenna Type | RPSMA connector, 90° antenna supplied |
| Max Distance (Free Air) | Over 1000 m |
| Radio Signal Indicator | Integrated (LinkQuality) |
| Output Power Adjustment | From local keyboard and remotely |
| Firmware Upgrade | Via radio |
| Services | Controlled load diagnostics via DALI protocol |
| Referends Standard | IEC 62386 |