The KET-CAD-104 is a module for the acquisition of 4 voltage or current inputs in the range of ±2.5 VDC, ±10 VDC and ±20 mA with 16 bit resolution. The module's auxiliary power supply can supply all 4 current loops at the same time. With DIP-Switch it is possible to set address, Baud Rate and sampling time for all channels to 240 ms or 480 ms. The KET-CAD-104 provides 1500 Vac input isolation from other low voltage circuits. The module supports RS485 serial communication with ModBUS RTU Slave protocol, maximum 32 nodes, compatible with ModBUS Master KET-RMB-211 and X-Monitor Gateways.
Protection Range | IP20 |
Operative Temperature | -10 ÷ +65 °C |
Dimensions | 17.5 x 100 x 112 mm (W x H x D) |
Mounting | DIN-rail |
Required DIN modules | 1 DIN module |
Electric Board Type | Industrial or switchboard |
Material | Nylon preloaded 30% glass fiber self-extinguishing class V0 |
Supply Voltage | 10 ÷ 40 VDC; 19 ÷ 28 VAC (50-60 Hz) |
Consumption | Max 0.5 W |
Connectors types | Removable screw terminals |
Supported Protocols | ModBUS RTU Slave |
Communication Rate | Up to 115.200 bps |
Isolation | 1500 VAC |
Connectors types | Removable screw terminals |
Channels | 4 |
Analog Inputs | Bipolar inputs programmable in voltage (±2.5 Vdc, ±10 Vdc, impedance >100 kO) or current (±20 mA) |
Precision | 0.1% |
Resolution | 16 bit |
Referends Standard | EN 61000-6-4, EN 61000-6-2, EN 61010-1 |
Approvals | CE |