KET-MDC-300 Wireless Power Meter selfpowered with display for measures Direct Current
KET-MDC-300 allows the measurement of continuous current up to a maximum of -2500 / + 2500 A, using a small Hall sensor connected with a comfortable cable length of 2m.
The display which is fitted allows for the calibration of the sensor via the integrated menu.
The sensor is equipped with a voltage input for the measurement of the voltage and by the same input feeds itself.
The display measures in Ampere, Volt, instantaneous power and energy meter over the network connection and the quality of the radio signal in real time.
The high sensitivity of the radio module allows to reach distances of over 100m.
GENERAL SPECIFICATIONS
| Ingressi | Hall sensore and tension |
| Measurand | Detected: current and voltage, Calculated: power and energy |
| Protection Range | IP40 |
| Dimensions | 145 x 85 x 37 mm (W x H x D) |
| Mounting | Wall mounting or by dedicated plate |
| Operative Temperature | -15 ÷ +60 °C |
RADIO MODULE
| Radio Frequency | 2.4 GHz |
| Antenna Type | 1 internal |
| Output Power | -17 ÷ +3 dBm |
| Sensitivity | -101 dBm |
| Compliance | IEEE 802.15.4 ZigBee Pro® |
INTEGRATED FUNCTIONS
| Power Meter | Integrated (LinkQuality) |
| Output Power Adjustment | From local menu and remotely |
| Sensor Calibration | From local menu and remotely |
| Firmware Upgrade | Yes |
CURRENT SENSOR
| Sensor Type | External with 2 m cable |
| Protection Range | IP54 |
| Typical Sensitivity | 280 V/T |
| Temperature Drift | < ±200 ppm/°C |
| Linearity | ± 0.2% |
| Linearity Range | -7.5 +7.5 mT |
| Nonlinearity | ± 5% |
| Noise Spectral Density | <125 nT/sqrt(Hz) (f = 10 Hz ÷ 10 Hz) |
© 2019 Kerberos. All Rights Reserved. | MaggiorDOMO is a registered trademark of Kerberos S.r.l. Unipersonale - VAT IT-03929170284 - R.E.A. 348334 - C.C.I.A.A. 03929170284 - Share Capital € 100.000,00 -
Privacy Policy-
Cookie Policy-
Cookie Settings