Module 5 relays with ModBUS interface
The KET-OUT-105 is a digital module for the output control of 5 SPST relays. It allows the setting of the state of the relays at rest (NO / NC) and is equipped with safe state relays at startup or in case of failure of communication with delay at insertion variable from 50 to 2,500 ms.
The KET-OUT-105 supports the ModBUS RTU transmission protocol via the RS485 serial interface, easy cabling via bus support housed in the DIN rail and hot swapping.
GENERAL SPECIFICATIONS
| Protection Range | IP20 |
| Operative Temperature | 0 ÷ +55 °C |
| Storage Temperature | -20 ÷ +70 °C |
| Relative Humidity | MAX 90% not condensing |
CASE
| Dimensions | 17.5 x 100 x 112 mm (W x H x D) |
| Mounting | DIN-rail |
| Required DIN modules | 1 DIN module |
| Electric Board Type | Industrial or switchboard |
| Material | Nylon 6 reinforced 30% glass fibre, self-extinguishing V-0 |
POWER SUPPLY
| Supply Voltage | 19 ÷ 40 VDC / 19 ÷ 28 VAC (50-60 Hz) |
| Consumption | < 2.5 W |
| Connectors types | Screw terminal |
RS485 INTERFACE
| Supported Protocols | ModBUS RTU with 32 slave |
| Communication Rate | 1200 ÷ 57600 bps |
| Isolation | 1500 VAC |
| Connectors types | Screw terminal |
RELE' OUTPUTS
| Channels | 5 SPST NO relay outputs with common |
| Voltage Output | 250 VAC @ 5 A with resistive load; 250 VAC @ 2 A with inductive load |
| Maximum Rated Current | 12 A |
CERTIFICATIONS
| Referends Standard | EN50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4 EN 50140/141; EN 61010-1 |
| Approvals | CE |
© 2019 Kerberos. All Rights Reserved. | MaggiorDOMO is a registered trademark of Kerberos S.r.l. Unipersonale - VAT IT-03929170284 - R.E.A. 348334 - C.C.I.A.A. 03929170284 - Share Capital € 100.000,00 -
Privacy Policy-
Cookie Policy-
Cookie Settings