The KET-GZE-210.R device provides access to the network X-Monitor via the Internet from a remote location.
Through the X-Manager software supplied it is very easy to program even complex sensor networks by setting all the necessary parameters and checking all the acquired measurements in real time.
Plus the ability to send data to external platforms (such as X-Platform), there is a memory card inside that can store data for more than three months.
The RS485 port operates in both Master and Slave RTU. This way you can connect the device directly to the gateway or access with a RTU Master to internal registers.
In addition, the KET-GZE-210.R incorporates a ModBUS server TCP/IP internal network connection that allows X-monitor SCADA systems, programmable logic controller (PLC) and human-appliance (HMI systems and viewers).
There are two concurrent connections.
The integration with proprietary data collection systems is made possible by the support for sending data to web services REST/JSON.
Protection Range | IP54 |
Operative Temperature | -15 ÷ +60 °C |
Dimensions | 160 x 80 x 38 mm (W x H x D) |
Mounting | Wall mounting or on DIN rail with supplied supports |
Material | Blend PC/ABS sel extinguishing UL94-VO |
Supply Voltage | 230 VAC (50 Hz) |
Connectors types | European plug 2 poles, CEE 7/16 |
Memory Type | SD memory |
Data Storage Capacity | For a period of over 3 months |
Supported Protocols | Master ModBUS RTU with 32 slave and ModBUS TCP/IP |
Connectors types | RJ11 |
Supported Protocols | 10/100 Base-T |
Connectors types | RJ45 |
Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
Radio Frequency | 2.4 GHz |
Output Power | +3 ÷ +20 dBm |
Sensitivity | -104 dBm |
Antenna Type | RPSMA connector, 90° antenna supplied |
Max Distance (Free Air) | Over 1000 m |
Radio Signal Indicator | Integrated (LinkQuality) |
Output Power Adjustment | From local keyboard and remotely |
Firmware Upgrade | Via radio |
Services | Routing of messages from/to Ethernet network and X-Monitor network. Network coordinator function ModBUS TCP server on two separate ports |