The gateway KET-GZE-400 offers advanced features and large storage capacity.
The Wi-Fi™ support increases the possibility of realizing an installation without a LAN connectivity and without the requirement to use expensive external accessories.
The Linux operating system allows the use of standard libraries for the support of security protocols and data transmission. Through the X-Manager software supplied it is very easy to program even complex sensor networks by setting all the necessary parameters and verifying in real time all the acquired measurements.
In addition to the ability to send data to external platforms (such as X-Platform), there is a memory card inside that can store data for more than three months.
The RS485 port works in both Master and Slave RTU mode. In this way you can connect directly to the gateway device or log on to internal registers with an RTU Master. Also the KET-GZE-400 incorporates a ModBUS TCP/IP server within that allows connection of X-Monitor network in SCADA systems, programmable logic (PLCs), human machine interfaces (HMI systems and viewers). There are two concurrent connections.
The integration with proprietary data collection systems is made possible by the support for sending data to web services REST / JSON.
Protection Range | IP20 |
Dimensions | 142 x 111 x 63 mm (W x H x D) - 8 moduls DIN |
Mounting | Wall mounting or on DIN rail |
Operative Temperature | -10 ÷ +60 °C |
Storage Temperature | -20 ÷ +85 °C |
Power Supply | 9 ÷ 28 VAC 50/60 Hz 11 ÷ 39 VDC |
Radio Frequency | 2.4 GHz |
Antenna Type | External antenna with 90° swivel |
Output Power | +3 dBm |
Sensitivity | -101 dBm |
Compliance | IEEE 802.15.4 ZigBee Pro® |
Services | Gateway function between network X-Monitor ™ to Wi-Fi™, Ethernet - Coordinator Network ZigBee™ - Server ModBUS on two distinct TCP / IP ports - Master and slave MODBUS RTU over RS485 port |
Operating System | Linux |
RAM Memory | 512MB DDR3 |
Memory Type | 8GB (standard) on internal not accessible SD Card |
RS485 | Master or slave ModBUS RTU, 3-way extractable connector |
USB OTG | USB connector Type A for FW update and data transfer |
WI-FI | Integrated with external antenna |