The KET-CEV-100 is a gas and energy steam flow calculator, which measures the flow rate and instantaneous value in open circuits.
Thanks to compensation equations, it can measure both natural gases (NX-19) and ideal gases (Redlich-Kwong), as well as saturated and superheated steam (IAPWS-IF97).
It accepts analog and/or impulsive flow signals from vortex, turbines, calibrated flanges, pilot, cone-meter, thermal mass.
It is equipped with analog outputs and relays, an RS485 interface with ModBUS RTU protocol up to 32 slaves.
Easy to configure and program using the front keys and the large display.
With Data Logger function, it records data every minute for 24 hours.
Protection Range | IP65 |
Operative Temperature | 0 ÷ +55 °C |
Dimensions | 147 x 72 x 161 mm (W x H x D) |
Supply Voltage | 14 ÷ 28 VDC @ 300 mA; internal power supply 95 ÷ 135 VAC or 190 ÷ 260 VAC |
Data Storage Capacity | Output generated at intervals of once a minutetoonceevery24hours. The total scan be programmed to reset on each print or at 24:00 hours. |
Supported Protocols | ModBUS RTU con 32 slave |
Communication Rate | 300 ÷ 9600 bps |
Channels | Pressure and temperature flow |
Output Type | 4-20 mA for mass flow, corrected volume or energy |
Channels | High and low flow alarms based on mass flow, corrected volume or energy. |
Voltage Output | 250 VAC, 30 VDC |
Maximum Rated Current | 5 A |
Gas | Ideal Gases (Redlich-Kwong); Natural Gases (NX-19) |
Fluid Temperature | I.G.: -273 ÷ +800 °C; N.G.: -40 ÷ +115 °C |
Fluid Pressure | I.G.: 0 ÷ 100 kPa abs; N.G.: 34.38 ÷ +101.325 kPa abs |
Steam | Saturated and overheated (IAPWS-IF97) |
Fluid Temperature | +20 ÷ +800 °C |
Fluid Pressure | 1 ÷ 100 kPa abs |
Approvals | UL508, CE Compliance, CENELEC, FM, CSA, SAA |