Non-resinned Wireless Relays for Industrial Environments
The switch insert wireless relay KET-REL-200 allows remote control of loads up to 8 A even with particularly high peak current (inrush current up to 100 A).
The small size allow inside fixtures such as ceiling lights, street lamps, etc.
IP40 degree of protection without internal resination.
Integrated diagnostic function allows to monitor the load, revealing any malfunctions.
The repeater function is integrated and the amplified radio allow to extend the X-Monitor network simply and economically.
The entrance for clean contact function steering, alarm, or counter counts seconds allows the use of the module in many different design situations.
The integrated thermostat function allows to create local emergency logics on temperature threshold and hysteresis programmable remotely.
| Protection Range | IP40 |
| Operative Temperature | -15 ÷ +60 °C |
| Dimensions | 100 x 45 x 30 mm (W x H x D) |
| Mounting | Wall mounting |
| Material | Black nylon |
| Supply Voltage | 230 VAC with integrated power supply (50-60 Hz) |
| Consumption | 1.5 VA |
| Connectors types | Device supplied with pre-skinned cable terminals |
| Channels | 1 |
| Digital Inputs | for clean contact with control, alarm, pulse counter, second counter, etc. functions. |
| Channels | 1 in common with the digital input. Allows connection with a PT1000 temperature probe |
| Channels | Remote control of loads |
| Voltage Output | 250 VAC @ 16 A; 24 VDC @ 16 A |
| Maximum Rated Current | 8 A |
| Isolation | Class II |
| Supported Protocols | X-Monitor Protocol (X-MP) / IEEE 802.15.4 / ZigBee™ Pro 2.0 |
| Radio Frequency | 2.4 GHz ISM Band |
| Output Power | +3 ÷ +20 dBm |
| Sensitivity | -104 dBm |
| Antenna Type | RPSMA connector, 90° antenna supplied |
| Max Distance (Free Air) | Over 1000 m |
| Radio Signal Indicator | Integrated (LinkQuality) |
| Output Power Adjustment | From local keyboard and remotely |
| Firmware Upgrade | Via radio |
| Services | Load diagnostics supported. Emergency thermostat function on remotely programmable temperature and hysteresis thresholds. |
