Three phase MID certificated network analyzer with Display for amperometric transformers
The energy meter KET-PMT-215 is powered and suitable for energy measurement in industrial and civil environment, with integrated RS485 ModBUS communication.
In addition to energy, the device measures the main electrical parameters and makes them available on the communication integrated port.
KET-PMT-215, MID certificate, is built in accordance with EN 50470-3, the accuracy of the active energy is referred to IEC / EN 62053-21 class 1 while that of the reactive energy is related to IEC / EN 62053-23 Class 2.
On the front panel is the LED metrology.
KET-PMT-215 is to be mounted on a DIN rail and can be connected to the Master ModBUS wireless KET-RMB-211 or directly to the Gateway X-Monitor
GENERAL SPECIFICATIONS
| Protection Range | Front: IP50; Screw terminals: IP20 |
| Operative Temperature | -25 ÷ +55 °C |
| Storage Temperature | -30 ÷ +70 °C |
| Relative Humidity | MAX 90% not condensing |
CASE
| Dimensions | 72 x 72 x 65 mm (W x H x D) |
| Mounting | DIN-rail |
| Required DIN modules | 4 DIN modules |
| Electric Board Type | Industrial or switchboard |
| Material | Noryl, PA66, self extinguishing: UL 94 V-O |
POWER SUPPLY
| Supply Voltage | Self power: 28 ÷ 260 VAC (48-62 Hz) |
| Consumption | Self-consumption <= 2 VA/1 W |
| Connectors types | Integrated screw terminals |
POWER METER
| Insertion Types | Four wires (three phase and 3 Current Transformer) |
| Connection | Commercial Current Transformer with secondary max 5 A, typical precision 5% |
| Start-up Current | 10 mA |
| Maximum Rated Current | Imax: 6A |
| Minimum Current | Imin = 0.05 A |
| Accuracy | ±0.5 RDG |
| Connections | Screws 2.4 mm x 3.5 mm; tightening torque: 0.4 Nm / 0.8 Nm |
| ESD Protection | 4 kV |
| Configuration | By keyboard |
RS485 INTERFACE
| Supported Protocols | ModBUS RTU |
| Communication Rate | 4.6/9.6 Kbps |
| Isolation | 4000 VRMS |
| Connectors types | Integrated screw terminals |
CURRENT AND VOLTAGE INPUT
| Voltage Inputs | 3 x 400 VLL |
| Current Inputs | 5 A @ 50 Hz |
CERTIFICATIONS
| Approvals | CE, cULus listed, MID |
| Security | IEC60664, IEC61010-1, EN60664, EN61010-1, EN62052-11 |
| Metrology | EN62053-21, EN62053-23, EN50470-3 |
© 2019 Kerberos. All Rights Reserved. | MaggiorDOMO is a registered trademark of Kerberos S.r.l. Unipersonale - VAT IT-03929170284 - R.E.A. 348334 - C.C.I.A.A. 03929170284 - Share Capital € 100.000,00 -
Privacy Policy-
Cookie Policy-
Cookie Settings